Brother International DreamMaker„ XE VE2200 Users Manual - English - Page 157
and then pull out about 10 cm approx.
View all Brother International DreamMaker„ XE VE2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
m Gently pull the upper thread to bring the bobbin thread up through the needle plate. PREPARING FOR BOBBIN WORK p Install the needle cover with tabs. plate cover and bobbin For details on installing the needle plate cover, refer to A "Cleaning the Race" on page A-15. 1 How to Create Bobbin Work → A loop of the bobbin thread comes out through the hole in the needle plate. n Insert tweezers through bobbin thread loop and pull bobbin thread above the needle plate. o Align the upper thread and bobbin thread, and then pull out about 10 cm (approx. 4 inches) of the threads and pass them under the presser foot toward the rear of the machine. a Bobbin cover b Bobbin cover with tabs CAUTION • When creating bobbin work, use the bobbin cover with tabs, otherwise the thread may become tangled or the needle may break. Note • When installing the needle plate cover, do not allow it to pinch the thread. q Install the embroidery unit. Note • When installing the embroidery unit, do not allow it to pinch the thread. • When the bobbin thread is replaced with a new one, be sure to repeat the procedure from a, otherwise the lower threading will not be done correctly. → This completes the upper and lower threading. Appendix A-7