Brother International DreamMaker„ XE VE2200 Users Manual - English - Page 167

CARE AND MAINTENANCE Cleaning the Cutter in the Bobbin d Use the screwdriver included with the machine to screw and attach the needle Case Area plate. A The cutter below the needle plate should be cleaned. If dust or lint accumulate on the cutter, it 2 will be difficult to cut the thread when the "Thread Cutter" button is pressed or the automatic thread cutting function is used. Clean the cutter when the thread is not easily cut. Maintenance and Troubleshooting a Follow steps a through e in "Cleaning the Race" on page A-15 to remove the needle plate cover. b Use the screwdriver machine to unscrew included with the and remove the needle plate. e Insert the tabs on the into the needle plate, needle plate cover and then slide the cover back on. About the Maintenance Message c Use the cleaning brush or a vacuum cleaner to remove any lint and dust from the cutter in the bobbin case area. a Cutter CAUTION • Do not touch the cutter, otherwise injuries may result. Once this message appears, it is recommended to take your machine to an authorized dealer or nearest authorized service center for a regular maintenance check. Although this message will disappear and the machine will continue to function once you press , the message will display several more times until the appropriate maintenance is performed. Please take the time to arrange the maintenance your machine requires once this message appears. Such steps will help to ensure you receive continued, uninterrupted hours of machine operation for the future. Appendix A-17