Brother International DreamMaker„ XE VE2200 Users Manual - English - Page 173

ERROR MESSAGES Marks Error Messages Not enough available memory to save the pattern. Delete another pattern? Cause/Solution This message is displayed when the memory is full and the pattern cannot be saved. OK to automatically lower the presser foot? OK to delete the selected pattern? This message is displayed when presser foot is raised). is pressed (the This message is displayed when the selected pattern is about to be deleted. OK to recall and resume previous memory? This message appears if the machine is turned off while sewing, then turned on again. Press to return the machine to the condition (pattern position and number of stitches) when it was turned off. Follow the procedure described in "If the Thread Breaks During Sewing" on page E-27 to align the needle position and sew the remainder of the pattern. OK to reset the pattern's border setting, position and/or angle? This message appears when you try to use the automatic positioning function using the sensor pen with the pattern, rotated or replaced, or with the border pattern. (see page B-58) OK to revert to the original position and/or angle? This message appears when you try to use the automatic positioning function using the sensor pen with the pattern, rotated or replaced. (see page B-58) Preventive maintenance is recommended. This message is displayed when the machine needs to be maintained. (see page A-15) Retrieving the pattern. Wait a moment. This message is displayed when the machine is retrieving a previously saved pattern while in "Embroidery Edit" mode. Sensor module error. This message appears when something is wrong with the sensor unit of the machine. Consult your authorized dealer. Set the clock. This message appears when the time/date is not set. Set time/date. (see page B-18) The bobbin thread is almost empty. This message is displayed when the bobbin thread is running out. The bobbin winder safety device has activated. Is the thread This message is displayed when the bobbin is being wound, tangled? and the motor locks because the thread is tangled, etc. The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage. This message appears before embroidery unit moves. The needle will move. Keep your hands etc. away from the needle area. This message appears when you touch the point closer than 2 cm from the needle drop point with the sensor pen in the sensor function. (see page B-55) The pattern extends out of the pattern area, repeat positioning This message appears when the specified pattern position of center and angle using sensor pen. extends out of the pattern area. Specify more centered position of the embroidery frame. (see page B-58) The pockets are full. Delete a pattern. This message is displayed when the memory is full and a pattern must be deleted. The safety device has been activated.Is the thread tangled? Is This message is displayed when the motor locks due to the needle bent? tangled thread or for other reasons related to thread delivery. The shutoff support mode has been activated. Turn off the machine. The upper thread may not be threaded correctly. Thread the upper thread from the beginning. This message appears when the machine is in the shutoff support mode. Turn off the machine once to start the machine again. (see page B-25) This message is displayed when it seems that the upper thread has not been threaded correctly. The USB media was changed. Do not change the USB media This message is displayed when you attempt to select a while it is being read. pattern after the USB media in which the pattern is saved has been changed. There is no needle plate cover. Attach a needle plate cover. This message is displayed when the needle plate cover is not attached. This file cannot be used. This message appears if the file format is incompatible with this machine. Check the list of compatible file formats. (see page E-44) Maintenance and Troubleshooting A 2 Appendix A-23