Brother International DreamMaker„ XE VE2200 Users Manual - English - Page 57

USING THE SENSOR PEN USING THE SENSOR PEN B Using the Sensor Pen Important Information about 2 Sensor Pen Hold the sensor pen, and then touch the point to be specified. When the tip of the sensor pen is pushed in, the position information is sent to the machine. The sensor pen emits the signal to the machine, and then the sensor pen receiver receives the signal to specify the position. When using the sensor pen, touch slowly and gently for the definite operation. Sensor Functions (For models equipped with the sensor function) 1) Touch: Touch a point with the sensor pen, then immediately lift up the pen. 2) Long touch: Touching a point with the sensor pen and holding it down for at least one second allows you to activate the functions that you just selected. Note • Once a point is touched with the sensor pen and the entered information is applied in the screen, perform the next operation. Repeatedly touching a point with the sensor pen may prevent the information from being correctly read. • Do not drag the sensor pen tip on the machine, otherwise the sensor pen tip may be chipped off. • If there is any problem with the guideline marker, the sensor function may not operate correctly. Memo • The sensor pen can be used to touch on the screen as a touch pen. a Sensor pen receiver b Signal is waved out from the sensor pen CAUTION • Do not insert any object into the sensor pen and the receiver, otherwise the machine may be damaged. IMPORTANT • Do not put your hand, the fabric or any object between the machine and the sensor pen, otherwise the sensor pen receiver may not receive the ultrasonic wave. • Do not use the machine close to any other unit which produces ultrasonic wave or a vibration sound, otherwise interference may occur. Basic operations B-55