Cisco ASR1006 Hardware Installation Guide - Page 118

-Port Channelized OC-3 ATM CEoP SPA Interface Specifications, 1-Port Channelized OC-3 ATM CEoP SPA

Page 118 highlights

1-Port Channelized OC3 STM-1 ATM CEoP SPA Overview Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs Table 3-49 describes the 1-Port Channelized OC-3 ATM CEoP SPA LEDs. Table 3-49 1-Port Channelized OC-3 ATM CEoP SPA LEDs LED Label C/A A/L STATUS Color Off Green Amber Off Green Amber Off Amber Green State Off On On Off On On Off On On Meaning Port is not enabled by software. Port is enabled by software. Port is enabled by software, and there is at least one alarm. Port is not enabled by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. SPA power is off. SPA power is on and good, and SPA is being configured. SPA is ready and operational. 1-Port Channelized OC-3 ATM CEoP SPA Interface Specifications The physical layer interface for the 1-Port Channelized OC-3 ATM CEoP SPA is Optical Carrier-3 (OC-3). The total bandwidth for the SPA is 155.52 Mbps. The 1-Port Channelized OC-3 ATM CEoP SPA can be channelized to either a maximum of 84 T1s or a maximum of 63 E1s. Note The 1-Port Channelized OC-3 ATM CEoP SPA can be channelized to E1s, only when SDH framing mode is used. Channelization to T1s is possible both in SONET and SDH framing mode. The single SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to optical fiber. 1-Port Channelized OC-3 ATM CEoP SPA Optical Transceiver Modules and Cables Cisco Systems, Inc. qualifies the optics that are approved for use with its SPAs. The 1-Port Channelized OC-3 ATM CEoP SPA supports the following types of optical transceiver modules: • Multimode (MM) SFP module (500m)-SFP-OC3-MM • Short-Reach (SR) SFP module (2 km)-SFP-OC3-SR • Intermediate-Reach (IR) SFP module (15 km)-SFP-OC3-IR1 • Long-Reach (LR) SFP module (40 km)-SFP-OC3-LR1 • Long-Reach 2 (LR2) or Extended Reach SFP module (80 km)-SFP-OC3-LR2 3-76 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

3-76
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port Channelized OC3 STM-1 ATM CEoP SPA Overview
Table 3-49
describes the 1-Port Channelized OC-3 ATM CEoP SPA LEDs.
1-Port Channelized OC-3 ATM CEoP SPA Interface Specifications
The physical layer interface for the 1-Port Channelized OC-3 ATM CEoP SPA is Optical Carrier-3
(OC-3). The total bandwidth for the SPA is 155.52 Mbps. The 1-Port Channelized OC-3 ATM CEoP SPA
can be channelized to either a maximum of 84 T1s or a maximum of 63 E1s.
Note
The 1-Port Channelized OC-3 ATM CEoP SPA can be channelized to E1s, only when SDH framing
mode is used. Channelization to T1s is possible both in SONET and SDH framing mode.
The single SPA port accepts an SFP module with a duplex LC-type receptacle that allows connection to
optical fiber.
1-Port Channelized OC-3 ATM CEoP SPA Optical Transceiver Modules and
Cables
Cisco Systems, Inc. qualifies the optics that are approved for use with its SPAs. The 1-Port Channelized
OC-3 ATM CEoP SPA supports the following types of optical transceiver modules:
Multimode (MM) SFP module (500m)—SFP-OC3-MM
Short-Reach (SR) SFP module (2 km)—SFP-OC3-SR
Intermediate-Reach (IR) SFP module (15 km)—SFP-OC3-IR1
Long-Reach (LR) SFP module (40 km)—SFP-OC3-LR1
Long-Reach 2 (LR2) or Extended Reach SFP module (80 km)—SFP-OC3-LR2
Table 3-49
1-Port Channelized OC-3 ATM CEoP SPA LEDs
LED Label
Color
State
Meaning
C/A
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software.
Amber
On
Port is enabled by software, and there is at least one alarm.
A/L
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software, loopback is off.
Amber
On
Port is enabled by software, loopback is on.
STATUS
Off
Off
SPA power is off.
Amber
On
SPA power is on and good, and SPA is being configured.
Green
On
SPA is ready and operational.