Cisco ASR1006 Hardware Installation Guide - Page 95

-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications, 1-Port OC-192c/STM-64 POS/RPR XFP

Page 95 highlights

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs 1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview Table 3-31 describes the 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs. Table 3-31 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs LED Label WRAP PASSTHRU MATESYNC CARRIER Color Off Green Amber Off Amber Off Green Off Green Amber ACTIVE STATUS Off Green Amber Off Green Amber State Meaning Off Port is not in wrap mode. On Port is in wrap mode somewhere on the ring. On Port is in wrap mode locally. Off Port is not in pass-through mode. On Port is in pass-through mode. Off Mate port is not synchronized. On Mate port is synchronized. Off Port is not enabled by software. On Port is enabled by software, and there is a valid SONET signal without any alarms. On Port is enabled by software, and there is at least one alarm (LOS, LOF, RDI, and so on). Blinking SRP mode mismatch alarm is indicated. Off Port is not enabled by software. On Port is enabled by software, and loopback is off. On Port is enabled by software, and loopback is on. Off SPA power is off. On SPA is ready and operational. On SPA power is on and good, and the SPA is being configured. 1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications The framer processes incoming and outgoing SONET or SDH frames. The framer operates at OC-192c/STM-64 line rates (9.95 Gbps). Packet data is transported with a user-configured encapsulation (such as Point-to-Point Protocol [PPP]), and is mapped into the STS-192c/STM-64 frame. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA interface is compliant with the following RFCs: • RFC 1662, PPP in HDLC-like Framing • RFC 2615, PPP over SONET/SDH. 1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and Cables The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a single-mode, 9.95 Gbps, OC-192c optical fiber (SONET STS-192c or SDH STM-64) optical transceiver module for SONET and SDH connection to the network. OL-14126-12 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

3-53
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
Table 3-31
describes the 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs.
1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications
The framer processes incoming and outgoing SONET or SDH frames. The framer operates at
OC-192c/STM-64 line rates (9.95 Gbps).
Packet data is transported with a user-configured encapsulation (such as Point-to-Point Protocol [PPP]),
and is mapped into the STS-192c/STM-64 frame.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA interface is compliant with the following RFCs:
RFC 1662,
PPP in HDLC-like Framing
RFC 2615,
PPP over SONET/SDH
.
1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules,
Connectors, and Cables
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a single-mode, 9.95 Gbps, OC-192c optical fiber
(SONET STS-192c or SDH STM-64) optical transceiver module for SONET and SDH connection to the
network.
Table 3-31
1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs
LED Label
Color
State
Meaning
WRAP
Off
Off
Port is not in wrap mode.
Green
On
Port is in wrap mode somewhere on the ring.
Amber
On
Port is in wrap mode locally.
PASSTHRU
Off
Off
Port is not in pass-through mode.
Amber
On
Port is in pass-through mode.
MATESYNC
Off
Off
Mate port is not synchronized.
Green
On
Mate port is synchronized.
CARRIER
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software, and there is a valid SONET signal
without any alarms.
Amber
On
Port is enabled by software, and there is at least one alarm (LOS,
LOF, RDI, and so on).
Blinking
SRP mode mismatch alarm is indicated.
ACTIVE
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software, and loopback is off.
Amber
On
Port is enabled by software, and loopback is on.
STATUS
Off
Off
SPA power is off.
Green
On
SPA is ready and operational.
Amber
On
SPA power is on and good, and the SPA is being configured.