Cisco ASR1006 Hardware Installation Guide - Page 60

2-Port Gigabit Ethernet SPA Overview Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs XFP Port Cabling Specifications Table 3-9 shows the port cabling specifications for an XFP module. Table 3-9 XFP Port Cabling Specifications XFP Module XFP-10GLR-OC192SR XFP-10GER-OC192IR XFP-10GZR-OC192LR Wavelength 1310 nm 1550 nm 1550 nm Fiber Type SMF SMF SMF 2-Port Gigabit Ethernet SPA Overview The following sections describe the 2-Port Copper and Optical Gigabit Ethernet SPA: • 2-Port Copper and Optical Gigabit Ethernet SPA LEDs, page 3-18 • 2-Port Copper and Optical Gigabit Ethernet SPA Cables, Connectors, and Pinouts, page 3-19 2-Port Copper and Optical Gigabit Ethernet SPA LEDs The 2-Port Copper and Optical Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and one STATUS LED, as shown in Figure 3-15. Figure 3-15 2-Port Copper and Optical Gigabit Ethernet SPA Faceplate 1 A/L 0 A/L 1 0 A/L 1 A/L SPA-2X1GE-V2 2 1 A/L (Active/Link) LED 2 STATUS LED Table 3-10 describes the 2-Port Copper and Optical Gigabit Ethernet SPA LEDs. Table 3-10 2-Port Copper and Optical Gigabit Ethernet SPA LEDs LED Label A/L STATUS Color Off Green Amber Off State Off On On Off Meaning Port is not enabled. Port is enabled and the link is up. Port is enabled and the link is down. SPA power is off. STATUS 211969 3-18 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-12