Cisco ASR1006 Hardware Installation Guide - Page 56
-Port 10-Gigabit Ethernet SPA Overview
UPC - 882658196423
View all Cisco ASR1006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
1-Port 10-Gigabit Ethernet SPA Overview Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs The 4-Port and 8-Port Fast Ethernet SPA supports automatic MDI/MDIX crossover at all speeds of operation allowing the SPA to work with straight-through and crossover Ethernet cables. Depending on your RJ-45 interface cabling requirements, use the pinouts in Figure 3-9 and Figure 3-10. Figure 3-9 Straight-Through Cable Pinout, RJ-45 Connection to a Hub or Repeater Hub or LAN switch 3 TxD+ 6 TxD- Ethernet port 3 RxD+ 6 RxD- H7101 1 RxD+ 2 RxD- 1 TxD+ 2 TxD- Figure 3-10 Router 3 TxD+ 6 TxD- 1 RxD+ 2 RxD- 101929 Crossover Cable Pinout, RJ-45 Connections Between Routers Router 3 TxD+ 6 TxD- 1 RxD+ 2 RxD- 1-Port 10-Gigabit Ethernet SPA Overview There are two types of 1-Port 10-Gigabit Ethernet SPA, the SPA-1X10GE-L-V2, which supports the 10GE LAN-PHY mode of operation at an optical interface bit rate of 10 Gbps, and the SPA-1X10GE-WL-V2, which supports both the 10GE LAN-PHY mode of operation (at 10 Gbps) and the 10GE WAN-PHY mode of operation (at 9.2946 Gbps). The following sections describe the 1-Port 10-Gigabit Ethernet SPA: • 1-Port 10-Gigabit Ethernet SPA LEDs, page 3-15 • 1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables, page 3-16 3-14 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-12