Dell 948 User Guide - Page 45

Understanding the Operator Panel Menus Defaults Options You can specify your operator panel default settings by selecting Defaults from the Setup menu. Defaults Menu From this menu: Photo Print Size Set Defaults You can: Specify the size of your photo. Specify which settings to use for your printer. Use Current Use Factory Network Setup Options You can configure your network setup options by selecting Network Setup from the Setup menu. Network Setup Menu From this menu: Print Setup Page Wireless Setup You can: Print a list of wireless network settings. View your wireless setup options. Network Name Wireless Signal Quality TCP/IP Menu Configure TCP/IP setup options. Enable DHCP If DHCP is disabled, these items appear on the display: Set IP Address Set IP Netmask Set IP Gateway If DHCP is enabled, these items appear on the display: View IP Address View IP Netmask View IP Gateway Network Time Allow your printer to update its internal clock according to the time server of your network. Enable Disable Reset Network Adapter to Factory Defaults Clear all wireless network settings. Wireless Setup Menu From this menu: Network Name Wireless Signal Quality You can: View the current SSID being used. NOTE: You cannot change the value of Network Name. View the current wireless signal strength. TCP/IP Menu From this menu: You can: file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]