Dell PowerEdge C6100 Hardware Owner's Manual - Page 106
See
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
3 Open the system. See "Opening the System" on page 91. CAUTION: To prevent damage to the drives and backplane, you must remove the hard drives from the system before removing the backplane. CAUTION: You must note the number of each hard drive and temporarily label them before removal so that you can replace them in the same locations. 4 Remove the screws that secure the hard-drive cage to the chassis. See Figure 3-31. Figure 3-31. Removing and Installing the Backplane 1 2 1 hard-drive cage 2 screw (10) 5 Remove the screws that secure the front-panel assemblies to the chassis. See Figure 3-32. 6 Disconnect all the cables from the backplane. See Figure 5-3 for 3.5-inch hard drives and Figure 5-6 for 2.5-inch hard drives. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 106 Installing System Components