Dell PowerEdge C6100 Hardware Owner's Manual - Page 108
Installing the Backplane, See
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Figure 3-33. Removing and Installing the Backplane From the Hard-Drive Cage 1 2 3 1 hard-drive cage 3 screws (10) 2 backplane Installing the Backplane CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Install the backplane into the hard-drive cage. See Figure 3-33. 2 Replace the screws that secure the backplane to the hard-drive cage. See Figure 3-33. 3 Replace the hard-drive cage into the chassis. See Figure 3-32. 4 Replace the screws that secure the front-panel assemblies to the chassis. See Figure 3-32. 5 Connect all the cables to the backplane. See Figure 5-3 for 3.5-inch hard drives and Figure 5-6 for 2.5-inch hard drives. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 108 Installing System Components