Dell PowerEdge C6100 Hardware Owner's Manual - Page 93
Disconnect the fan's power cable from the fan-controller board.
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Open the system. See "Opening the System" on page 91. 3 Disconnect the fan's power cable from the fan-controller board. Note the routing of the cable underneath the tabs on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 4 Lift the fan out of the cooling-fan cage. Figure 3-23. Removing and Installing a Cooling Fan 1 2 1 cooling-fan cage 2 cooling fan (4) Installing System Components 93