Dell PowerEdge C6100 Hardware Owner's Manual - Page 83
Installing the Interposer Extender, Connect all the cables to the interposer extender. See
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Figure 3-17. Removing and Installing the Interposer Extender 1 2 3 1 screw (5) 3 interposer extender 2 interposer-extender tray Installing the Interposer Extender CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Place the interposer extender into the interposer-extender tray. 2 Replace the five screws that secure the interposer extender to the interposer-extender tray. 3 Connect all the cables to the interposer extender. See Figure 5-9. 4 Replace the system-board assembly. See "Installing a System-Board Assembly" on page 62. 5 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Installing System Components 83