Dell PowerEdge C6100 Hardware Owner's Manual - Page 41

IDE Configuration, Primary IDE Master, To con Primary, Secondary - raid

Get Dell PowerEdge C6100 PDF manuals and user guides View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

IDE Configuration NOTE: The AHCI Port is shown in SETUP screen when it is in the Enhanced AHCI or RAID mode. Option Configure SATA as Hard Disk Write Protect (Disabled default) IDE Detect Time Out (Sec) (35 default) Description Configures the SATA: • IDE - SATA#1 Configuration (Enhanced default) Configures SATA#1. - SATA#2 Configuration (Enhanced default) Configures SATA#2. • Primary Master/Slave is SATA Port 0/2 • Secondary Master/Slave is SATA Port 1/3 • AHCI/RAID • AHCI Port 0~5 Enables or disables device write protection. This is effective only if the device is accessed through BIOS. Selects the time out value for detecting ATA/ATAPI device(s). Primary IDE Master To configure Primary, Secondary, Third or Fourth device on the IDE channel. Option Device Vendor Size LAB Mode: Block (Multi-Sector Transfer) (Auto default) PIO Mode (Auto default) Description Displays the type of device assigned to this channel. Displays the manufacturer's name of the device. Displays the size of the device (GB). Indicates whether LAB access mode is supported or not supported. Indicates whether multi-sector transfer is supported. Indicates whether PIO mode is supported. Using the System Setup Program 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Using the System Setup Program
41
IDE Configuration
NOTE:
The
AHCI Port
is shown in SETUP screen when it is in the Enhanced AHCI or
RAID mode.
Primary IDE Master
To configure Primary, Secondary, Third or Fourth device on the IDE channel.
Option
Description
Configure SATA as
Configures the SATA:
• IDE
– SATA#1 Configuration (
Enhanced
default)
Configures SATA#1.
– SATA#2 Configuration (
Enhanced
default)
Configures SATA#2.
•
Primary Master/Slave is SATA Port 0/2
•
Secondary Master/Slave is SATA Port 1/3
• AHCI/RAID
•
AHCI Port 0~5
Hard Disk Write Protect
(
Disabled
default)
Enables or disables device write protection. This is
effective only if the device is accessed through BIOS.
IDE Detect Time Out (Sec)
(
35
default)
Selects the time out value for detecting
ATA/ATAPI device(s).
Option
Description
Device
Displays the type of device assigned to this channel.
Vendor
Displays the manufacturer's name of the device.
Size
Displays the size of the device (GB).
LAB Mode:
Indicates whether LAB access mode is supported or
not supported.
Block (Multi-Sector
Transfer) (
Auto
default)
Indicates whether multi-sector transfer is supported.
PIO Mode (
Auto
default)
Indicates whether PIO mode is supported.