Dell PowerEdge C6100 Hardware Owner's Manual - Page 88
Installing the RAID Battery Carrier, See
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Figure 3-20. Removing and Installing the RAID Battery Carrier 3 2 1 1 RAID battery carrier 3 system-board assembly 2 screws (3) Installing the RAID Battery Carrier 1 Place the RAID battery carrier in position on the interposer extender. See Figure 3-20. 2 Replace the screws securing the RAID battery carrier to the interposer extender. See Figure 3-20. 3 Install the RAID battery into the RAID battery carrier. See "Installing the RAID Battery" on page 86. 4 Replace the system-board assembly. See "Installing a System-Board Assembly" on page 62. 5 Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals. 88 Installing System Components
88
Installing System Components
Figure 3-20.
Removing and Installing the RAID Battery Carrier
Installing the RAID Battery Carrier
1
Place the RAID battery carrier in position on the interposer extender.
See Figure 3-20.
2
Replace the screws securing the RAID battery carrier to the interposer
extender. See Figure 3-20.
3
Install the RAID battery into the RAID battery carrier. See "Installing the
RAID Battery" on page 86.
4
Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 62.
5
Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
1
RAID battery carrier
2
screws (3)
3
system-board assembly
1
3
2