Dell PowerEdge C6100 Hardware Owner's Manual - Page 50
LAN Configuration, Power Throttling Configuration, IP Address, Sets BMC IP address source from BIOS.
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Option Description Clear BMC System Event Log Clears BMC System Event Log. BMC PEF status Displays BMC PEF status. Set BMC NIC (Shared default) Sets the type of BMC NIC from BIOS. BMC is reset. Set LAN Configuration Allows LAN Configuration settings. LAN Configuration Option Channel Number (01 default) BMC IP address source (DHCP default) Description Enters channel number for SET LAN Config Command. Proper value is below 16. Sets BMC IP address source from BIOS. Power Throttling Configuration Option Power Throttling Power CAP Chassis CAP Description Enable or disable Power throttling Enable or disable Power CAP Set Chassis CAP value NOTE: The default values are dependant on BMC setting IP Address Option IP Address (default value depends on BMC setting) Description Enters IP address in decimal in the form of XXX.XXX.XXX.XXX (XXX is less than 256 and in decimal only). NOTE: When BMC IP status is static, IP Address is useful 50 Using the System Setup Program