Dell PowerEdge C6100 Hardware Owner's Manual - Page 112
Replace the hard drives. See Installing a Hard Drive Into a Hard-Drive, Carrier
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
7 Connect front panel cables to the fan controller board. See Figure 5-12. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 8 Connect all the cables to the backplane. See Figure 5-3 for 3.5-inch hard drives and Figure 5-6 for 2.5-inch hard drives. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 9 Close the system. See "Closing the System" on page 92. 10 Replace the hard drives. See "Installing a Hard Drive Into a Hard-Drive Carrier" on page 58. 11 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. 112 Installing System Components
112
Installing System Components
7
Connect front panel cables to the fan controller board. See Figure 5-12.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
8
Connect all the cables to the backplane. See Figure 5-3 for 3.5-inch hard
drives and Figure 5-6 for 2.5-inch hard drives.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
9
Close the system. See "Closing the System" on page 92.
10
Replace the hard drives. See "Installing a Hard Drive Into a Hard-Drive
Carrier" on page 58.
11
Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.