Dell PowerEdge C6100 Hardware Owner's Manual - Page 35
Using the System Setup Program, Start Menu - hard drive configuration
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the System Setup Program Start Menu The system employs the latest AMI CMOS BIOS, which is stored in Flash memory. The Flash memory supports the Plug and Play specification, and contains a System Setup program, the Power On Self Test (POST) routine, and the PCI auto-configuration utility. This system board supports system BIOS shadowing, enabling the BIOS to execute from 64-bit onboard write-protected DRAM. This Setup utility should be executed under the following conditions: • When changing the system configuration, configure items such as: - Hard drives, diskette drives, and peripherals - Password protection from unauthorized use - Power management features • When a configuration error is detected by the system and you are prompted to make changes to the Setup utility • When redefining the communication ports to prevent any conflicts • When changing the password or making other changes to the security setup NOTE: Only items in brackets [ ] can be modified. Items that are not in brackets are display only. Using the System Setup Program 35