Dell PowerEdge C6100 Hardware Owner's Manual - Page 44
PCI Configuration, NIC Function Disable or PXE/iSCSI Support - drivers
View all Dell PowerEdge C6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Option USB 2.0 Controller Mode (HiSpeed default) BIOS EHCI Hand-Off (Enabled default) USB Mass Storage Reset Delay (20 sec default) Device# Emulation Type (Auto default) Description Configures the USB 2.0 controller in HiSpeed (480 Mbps) or FullSpeed (12 Mbps). This is a work around for operating systems without EHCI handoff support. The EHCI ownership change should be claimed by EHCI driver. The number of seconds that the POST waits for the USB mass storage device after the start Unit command is issued. USB device model name If Auto, USB devices, which are less than 530 MB are emulated as floppy and others are be emulated as hard disk. Forced FDD option can be used to force a formatted hard drive to boot as FDD (e.g. ZIP drive) PCI Configuration Option Description NIC Function Support (PXE NIC Function Disable or PXE/iSCSI Support default) NIC1 Option ROM (Enable Set OnBoard 82576EB Disable/Enable Option ROM default) NIC2 Option ROM (Enable Set OnBoard 82576EB Disable/Enable Option ROM default) 44 Using the System Setup Program