Dell Vostro 220 Service Manual - Page 55

Chassis Support Bracket CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. Removing the Chassis Support Bracket NOTE: Only the Vostro 220s includes a chassis support bracket. You must remove the bracket before you can remove or replace many of the computer components. 1 Follow the procedures in "Before Working on Your Computer" on page 35. 2 Remove the computer cover (see "Removing the Computer Cover" on page 47). 3 Remove the screw that secures the chassis support bracket. 4 Rotate the flange away from the back of the computer. 5 Disengage any cables stored in the cable clip at the top of the support bracket. 6 Lift the end of the support bracket at the back of the computer. 7 Slide the tabs at the other end of the bracket out of the slots in the chassis, and remove the bracket out of the computer. Chassis Support Bracket 55