Dell Vostro 220 Service Manual - Page 62
After Removing or Installing a PCI or PCI Express Card - 220s driver
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6 1 5 4 2 3 1 PCI Express x16 card 3 securing tab 5 PCI Express x1 card 2 PCI Express x16 card slot 4 PCI Express x1 card slot 6 securing slot 7 Align the card in the connector and press down firmly. Ensure that the card is fully seated in the connector slot. 8 Replace and tighten the screw to secure the card in the slot. 9 Connect any cables that should be attached to the card. See the documentation for the card for information about the card's cable connections. NOTICE: Do not route card cables over or behind the cards, except for Vostro 220s, which provides a cable clip in a chassis support bracket. Cables routed over the cards, in the absence of a cable clip, can prevent the computer cover from closing properly or cause damage to the equipment. 10 For the Vostro 220s, replace the chassis support bracket (see "Replacing the Chassis Support Bracket" on page 57). 11 Follow the procedure in "After Working on Your Computer" on page 45. 12 Install any drivers required for the card as described in the documentation for the card. 13 To complete the installation procedure, see "Configuring Your Computer After Removing or Installing a PCI or PCI Express Card" on page 63. 62 PCI and PCI Express Cards