Dell Vostro 220 Service Manual - Page 57
Replacing the Chassis Support Bracket
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Replacing the Chassis Support Bracket 1 Holding the bracket at an angle, insert the tabs on one end of the bracket into the slots in the chassis. 2 While holding the bracket slightly raised, slide any cables as appropriate into the cable clip for storage. 3 Lower the other end of the bracket to engage the remaining tab. 4 Rotate the flange closed and replace and tighten the securing screw. Chassis Support Bracket 57
Chassis Support Bracket
57
Replacing the Chassis Support Bracket
1
Holding the bracket at an angle, insert the tabs on one end of the bracket
into the slots in the chassis.
2
While holding the bracket slightly raised, slide any cables as appropriate
into the cable clip for storage.
3
Lower the other end of the bracket to engage the remaining tab.
4
Rotate the flange closed and replace and tighten the securing screw.