Dell Vostro 220 Service Manual - Page 73
Media Card Reader, Removing a Media Card Reader
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
8 Check all cables to ensure that they are properly connected and firmly seated. 9 For the Vostro 220s, replace the chassis support bracket (see "Replacing the Chassis Support Bracket" on page 57). 10 Follow the procedure in "After Working on Your Computer" on page 45. 11 When you restart your computer, check the drive configuration information in the system setup program: a Enter the system setup program (see "System Setup Program" on page 129 for instructions). b In the Drives section of the system setup program, under Drive 0 through 3, set the drive setting to the correct configuration. 12 See the documentation that came with the drive for instructions on installing any software required for drive operation. Media Card Reader CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. Removing a Media Card Reader 1 Follow the procedures in "Before Working on Your Computer" on page 35. 2 Remove the computer cover (see "Removing the Computer Cover" on page 47). 3 Remove the bezel (see "Removing the Bezel" on page 51). Drives 73