Dell Vostro 220 Service Manual - Page 79
and the 3.5-inch device in their respective drive cages., For the Vostro 220s
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
9 For the Vostro 220s, push the release latch down to secure the optical drive and the 3.5-inch device in their respective drive cages. NOTE: Install the media card reader into the drive bay before you connect the USB interface cable to the back of the device. 10 Connect the USB interface cable to the back of the device. NOTICE: The connectors are "keyed" for correct insertion; that is, a notch or a missing pin on one connector fits with a tab or a filled-in hole on the other connector. Align the cable connectors correctly before inserting them to avoid damage to the connectors. 11 Ensure that the other end of the USB interface cable is connected to a USB connector on the system board (see "System Board Components" on page 40). 1 2 4 3 1 screws (2) 3 media card reader 2 screw holes (2) 4 USB interface cable 12 Replace the bezel (see "Replacing the Bezel" on page 53). Drives 79