Epson ActionLaser 1100 User Manual - Page 24

Choosing Paper, quality, any particular brand or type, paper may be, by the manufacturer at any time

Get Epson ActionLaser 1100 PDF manuals and user guides View all Epson ActionLaser 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

5. Push the paper release lever toward the back of the printer. This places the feed roll in contact with the paper stack. Paper will not feed properly if the paper release lever is not in the feed position. For information about loading heavy paper, envelopes, labels, or transparencies, see "Printing on special paper" later in this chapter. Choosing paper For best results, use paper made especially for laser printers or plain-paper copiers. Paper should be of good quality and relatively smooth with a weight between 16 and 24 lb (60 and 90 g/m²). Because the printer is sensitive to moisture, always store paper in a dry place. You may use colored paper but not paper to which a clear or colored coating has been added. For preprinted paper stock such as letterheads, use papers and inks designed for laser printers. Ordinary inks or dyes may smear or come off when subjected to the high temperature of the fuser. Always test samples of paper stock before purchasing large amounts. Note: The quality of any particular brand or type of paper may be changed by the manufacturer at any time, so EPSON cannot guarantee any particular one. In addition, you can print on special stock such as heavy paper (greater than 24 lb or 90 g/m2), envelopes, labels, or transparencies. To do so, you need to feed single sheets one at a time. See the next section "printing on special paper." Using Your Printer 1-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
5.
Push the paper release lever toward the back of the printer.
This places the feed roll in contact with the paper stack.
Paper will not feed properly if the paper release lever is not
in the feed position.
For information about loading heavy paper, envelopes, labels,
or transparencies, see “Printing on special paper” later in this
chapter.
Choosing paper
For best results, use paper made especially for laser printers
or plain-paper copiers. Paper should be of good quality and
relatively smooth with a weight between 16 and 24 lb (60 and
90
g/m²). Because the printer is sensitive to moisture, always
store paper in a dry place.
You may use colored paper but not paper to which a clear or
colored coating has been added. For preprinted paper stock
such as letterheads, use papers and inks designed for laser
printers. Ordinary inks or dyes may smear or come off when
subjected to the high temperature of the fuser. Always test
samples of paper stock before purchasing large amounts.
Note:
The
quality
of
any particular brand or type
of
paper may be
changed
by the manufacturer at any time, so EPSON cannot guarantee any
particular one.
In addition, you can print on special stock such as heavy
paper (greater than 24 lb or 90 g/m
2
), envelopes, labels, or
transparencies. To do so, you need to feed single sheets one at a
time. See the next section "printing on special paper.”
Using
Your
Printer
1-9