Epson ActionLaser 1100 User Manual - Page 43
in the Read This First, Troubleshooting, Some or all of the output is garbled or printed as asterisks
View all Epson ActionLaser 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Make sure that your interface cable is shielded. The toner cartridge may be empty. Replace the toner cartridge as described in the Read This First guide. A single sheet or the last sheet doesn't print The file you sent might not contain a form feed command. (The printer won't print a single page or the last page of a multi-page document unless the file ends in a form feed command.) To print the single sheet or the last sheet, briefly press the reset button at the back of the printer. Some or all of the output is garbled or printed as asterisks Make sure that both ends of the interface cable are plugged in securely. Make sure your interface cable is shielded. If the printer still does not print correctly, call your dealer or a qualified service person. Position of the printout is not correct Make sure that you are using the correct page length and margin settings in your software program. Graphics don't print correctly Make sure that your software program supports the LJ3 emulation. Graphics require large amounts of memory; if you are encountering problems because of insufficient memory, simplify your graphics or use fewer graphics on a page. If you often print graphics-intensive pages, you may want to add more memory as described in Appendix D. 3-4 Troubleshooting