Epson ActionLaser 1100 User Manual - Page 41
Resetting the Printer, General Problems, Paper Handling - troubleshooting
View all Epson ActionLaser 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Resetting the Printer In many cases, you can recover from a problem, such as a print overrun or a memory overflow, by briefly pressing the reset button at the rear of the printer. This clears the error so the printer can resume printing. You can also reset the printer to clear its memory of any print jobs currently in memory and to return to the factory defaults. To reset the printer, hold down the reset button at the back of the printer for five seconds. Be aware that your software settings override the default settings. General Problems This section describes some general problems you may encounter and gives some suggestions on how to avoid them. Preventing paper feed and paper jam problems If you have frequent paper feed or paper jam problems, use this checklist of corrective measures: Use a higher-quality paper that is not too thin or rough. Some types of paper require single-sheet feeding. See "Paper Handling" in Chapter 1. Be sure to pull the paper release lever toward the front of the printer before installing paper. After paper is installed, push the lever back. Always remove any paper remaining in the paper tray before you load paper. Do not add more paper when paper is already loaded. Fan the stack of paper and then tap it on the edge to align it before loading. 3-2 Troubleshooting