Fluke 199C/S FE 192,196,199 C Users Manual - Page 107
AC Voltage VAC, AC+DC Voltage True RMS, Normal Mode DC Rejection
View all Fluke 199C/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
AC Voltage (VAC) Maximum Voltage with 10:1 probe 1000 V direct (1:1 300 V Maximum Resolution with 10:1 probe 1 mV direct (1:1 100 µV Full Scale Reading 1100 counts Accuracy DC coupled: DC to 60 Hz 1.5 % +10 counts) AC coupled, low frequencies: 50 Hz direct (1:1 2.1 % + 10 counts) 60 Hz direct (1:1 1.9 % + 10 counts) With the 10:1 probe the low frequency roll off point will be lowered to 2 Hz, which improves the AC accuracy for low frequencies. When possible use DC coupling for maximum accuracy. AC or DC coupled, high frequencies: 60 Hz to 20 kHz 2.5 % + 15 counts) 20 kHz to 1 MHz 5 % + 20 counts) 1 MHz to 25 MHz 10 % + 20 counts) For higher frequencies the instrument's frequency roll off starts affecting accuracy. Normal Mode DC Rejection 50 dB 9 Specifications Automatic Scope Measurements All accuracies are valid if: • The waveform amplitude is larger than one division • At least 1.5 waveform period is on the screen AC+DC Voltage (True RMS) Maximum Voltage with 10:1 probe 1000 V direct (1:1 300 V Maximum Resolution with 10:1 probe 1 mV direct (1:1 100 µV Full Scale Reading 1100 counts Accuracy DC to 60 Hz 1.5 % + 10 counts) 60 Hz to 20 kHz 2.5 % + 15 counts) 20 kHz to 1 MHz 5 % + 20 counts) 1 MHz to 25 MHz 10 % + 20 counts) For higher frequencies the instrument's frequency roll off starts affecting accuracy. 99