Fluke 199C/S FE 192,196,199 C Users Manual - Page 42
Plotting Measurements Over Time, TrendPlot™, Starting a TrendPlot Function
View all Fluke 199C/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Fluke 192B - 196B/C - 199B/C Users Manual Plotting Measurements Over Time (TrendPlot™) Use the TrendPlot function to plot a graph of Scope or Meter measurements as function of time. Note Because the navigations for the dual input TrendPlot (Scope) and the single input TrendPlot (Meter) are identical, only TrendPlot (Scope) is explained in the next sections. 34 Starting a TrendPlot Function To start plotting a graph of the reading over time, do the following: 1 Apply a signal to the red BNC input A and turn on Reading 1 in scope mode 2 Open the RECORDER main menu. 3 Highlight Trend Plot (Scope). 4 Start the TrendPlot recording. The test tool continuously records the digital readings of the input A measurements and displays these as a graph. The TrendPlot graph rolls from right to left like a paper chart recorder. Observe that the recorded time from start appears at the bottom of the screen. The present reading appears on top of the screen. (See Figure 18.) Note When simultaneously TrendPlotting two readings, the screen area is split into two sections of four divisions each.