Fluke 199C/S FE 192,196,199 C Users Manual - Page 37

Making a Current Measurement, Carefully read the instructions about the, current probe you are using.

Get Fluke 199C/S PDF manuals and user guides View all Fluke 199C/S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Making a Current Measurement You can measure current in both Scope mode and Meter mode. Scope mode has the advantage of two waveforms being displayed while you perform measurements. Meter mode has the advantage of high measurement resolution. The next example explains a typical current measurement in Meter mode. Warning 3 Carefully read the instructions about the current probe you are using. To set up the test tool, do the following: 1 Connect a current probe (e.g. i400, optional) from the 4-mm banana jack outputs to the 4 conductor to be measured. Ensure that the red and black probe connectors 5 correspond to the red and black banana jack inputs. (See Figure 14.) 2 Display the METER key labels. 2 Using The Multimeter Making Multimeter Measurements Figure 14. Measurement Setup Open the Measurement menu. Highlight A ac.... Open the Current Probe submenu. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Using The Multimeter
Making Multimeter Measurements
2
29
Making a Current Measurement
You can measure current in both Scope mode and Meter
mode. Scope mode has the advantage of two waveforms
being displayed while you perform measurements.
Meter mode has the advantage of high measurement
resolution.
The next example explains a typical current measurement
in Meter mode.
Warning
Carefully read the instructions about the
current probe you are using.
To set up the test tool, do the following:
1
Connect a current probe (e.g. i400, optional)
from the 4-mm banana jack outputs to the
conductor to be measured.
Ensure that the red and black probe connectors
correspond to the red and black banana jack
inputs. (See Figure 14.)
2
Display the
METER
key labels.
Figure 14. Measurement Setup
3
Open the
Measurement
menu.
4
Highlight
A ac...
.
5
Open the
Current Probe
submenu.