HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 103
dot1x authentication-method, Parameters, Description, Examples, Syntax
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Parameters interface interface-list: Specifies a port list, which can contain multiple ports. The interface-list argument is in the format of interface-list = { interface-type interface-number [ to interface-type interface-number ] } & , where interface-type represents the port type, interface-number represents the port number, and & means that you can provide up to 10 ports or port ranges. The start port number must be smaller than the end number and the two ports must be of the same type. Description Use dot1x in system view to enable 802.1X globally. Use undo dot1x in system view to disable 802.1X globally. Use dot1x interface in system view or dot1x in interface view to enable 802.1X for specified ports. Use undo dot1x interface in system view or the undo dot1x command in interface view to disable 802.1X for specified ports. By default, 802.1X is neither enabled globally nor enabled for any port. 802.1X must be enabled both globally in system view and for the intended ports in system view or interface view. Otherwise, it does not function. You can configure 802.1X parameters either before or after enabling 802.1X. Related commands: display dot1x. Examples # Enable 802.1X for ports GigabitEthernet 1/0/1, and GigabitEthernet 1/0/5 to GigabitEthernet 1/0/7. system-view [Sysname] dot1x interface gigabitethernet 1/0/1 gigabitethernet 1/0/5 to gigabitethernet 1/0/7 Or system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] dot1x [Sysname-GigabitEthernet1/0/1] quit [Sysname] interface gigabitethernet 1/0/5 [Sysname-GigabitEthernet1/0/5] dot1x [Sysname-GigabitEthernet1/0/5] quit [Sysname] interface gigabitethernet 1/0/6 [Sysname-GigabitEthernet1/0/6] dot1x [Sysname-GigabitEthernet1/0/6] quit [Sysname] interface gigabitethernet 1/0/7 [Sysname-GigabitEthernet1/0/7] dot1x # Enable 802.1X globally. system-view [Sysname] dot1x dot1x authentication-method Syntax dot1x authentication-method { chap | eap | pap } 94