HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 113
dot1x multicast-trigger
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
• If you specify the interface-list argument, the command applies to the specified ports. In Ethernet interface view, the interface-list argument is not available and the command applies to only the Ethernet port. Related commands: display dot1x. Examples # Set the maximum number of concurrent 802.1X users on port GigabitEthernet 1/0/1 to 32. system-view [Sysname] dot1x max-user 32 interface gigabitethernet 1/0/1 Or system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] dot1x max-user 32 # Configure GigabitEthernet 1/0/2 through GigabitEthernet 1/0/5 each to support a maximum of 32 concurrent 802.1X users. system-view [Sysname] dot1x max-user 32 interface gigabitethernet 1/0/2 to gigabitethernet 1/0/5 dot1x multicast-trigger Syntax dot1x multicast-trigger View undo dot1x multicast-trigger Ethernet interface view Default level 2: System level Parameters None Description Use dot1x multicast-trigger to enable the 802.1X multicast trigger function. The device acts as the initiator and periodically multicasts Identify EAP-Request packets out of a port to detect 802.1X clients and trigger authentication. Use undo dot1x multicast-trigger to disable the function. By default, the multicast trigger function is enabled. You can use the dot1x timer tx-period command to set the interval for sending multicast Identify EAP-Request packets. Related commands: display dot1x. Examples # Enable the multicast trigger function on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 104