HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 92
secondary authentication (HWTACACS scheme view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
port-number: Service port number of the secondary HWTACACS accounting server. It ranges from 1 to 65535 and defaults to 49. vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the secondary HWTACACS accounting server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server is on the public network, do not specify this option. Description Use secondary accounting to specify the secondary HWTACACS accounting server. Use undo secondary accounting to remove the configuration. By default, no secondary HWTACACS accounting server is specified. The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the configuration fails. If you configure the command repeatedly, only the last configuration takes effect. If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance vpn-instance-name option. The VPN specified by this command takes precedence over the VPN specified for the HWTACACS scheme. You can remove an accounting server only when it is not used by any active TCP connection to send accounting packets. Removing an accounting server affects only accounting processes that occur after the remove operation. Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view). Examples # Specify the IP address and port number of the secondary accounting server for HWTACACS scheme hwt1 as 10.163.155.12 with TCP port number 49. system-view [Sysname] hwtacacs scheme hwt1 [Sysname-hwtacacs-hwt1] secondary accounting 10.163.155.12 49 secondary authentication (HWTACACS scheme view) Syntax secondary authentication ip-address [ port-number | vpn-instance vpn-instance-name ] * View undo secondary authentication HWTACACS scheme view Default level 2: System level Parameters ip-address: IP address of the secondary HWTACACS authentication server, in dotted decimal notation. The default setting is 0.0.0.0. port-number: Service port number of the secondary HWTACACS authentication server. It ranges from 1 to 65535 and defaults to 49. 83