HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 243

client-verify enable Syntax client-verify enable View undo client-verify enable SSL server policy view Default level 2: System level Parameters None Description Use client-verify enable to configure the SSL server to require the client to pass certificate-based authentication. Use undo client-verify enable to restore the default. By default, the SSL server does not require certificate-based SSL client authentication. If you configure the client-verify enable command and enable the SSL client weak authentication function, whether the client must be authenticated is up to the client. If the client chooses to be authenticated, the client must pass authentication before accessing the SSL server; otherwise, the client can access the SSL server without authentication. If you configure the client-verify enable command but disable the SSL client weak authentication function, the SSL client must pass authentication before accessing the SSL server. Related commands: client-verify weaken and display ssl server-policy. Examples # Configure the SSL server to require certificate-based SSL client authentication. system-view [Sysname] ssl server-policy policy1 [Sysname-ssl-server-policy-policy1] client-verify enable client-verify weaken Syntax client-verify weaken View undo client-verify weaken SSL server policy view Default level 2: System level Parameters None 234