HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 72
server-type, state primary
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
[Sysname] radius scheme radius1 [Sysname-radius-radius1] security-policy-server 10.110.1.2 server-type Syntax server-type { extended | standard } View undo server-type RADIUS scheme view Default level 2: System level Parameters extended: Specifies the extended RADIUS server (generally running on IMC), which requires the RADIUS client and RADIUS server to interact according to the procedures and packet formats provisioned by the proprietary RADIUS protocol. standard: Specifies the standard RADIUS server, which requires the RADIUS client and RADIUS server to interact according to the procedures and packet format of the standard RADIUS protocol (RFC 2865 and 2866 or their successors). Description Use server-type to configure the RADIUS server type. Use undo server-type to restore the default. By default, the supported RADIUS server type is standard. Examples # Configure the RADIUS server type of RADIUS scheme radius1 as standard. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] server-type standard state primary Syntax View state primary { accounting | authentication } { active | block } RADIUS scheme view Default level 2: System level Parameters accounting: Sets the status of the primary RADIUS accounting server. authentication: Sets the status of the primary RADIUS authentication/authorization server. active: Specifies the active state, the normal operation state. 63