HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 264
arp anti-attack source-mac aging-time, arp anti-attack source-mac exclude-mac
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
• In filter detection mode, the device generates a log message and filters out the ARP packets from the MAC address. • In monitor detection mode, the device only generates a log message. If no detection mode is specified in the undo arp anti-attack source-mac command, both detection modes are disabled. Examples # Enable filter-mode source MAC address based ARP attack detection system-view [Sysname] arp anti-attack source-mac filter arp anti-attack source-mac aging-time Syntax arp anti-attack source-mac aging-time time View undo arp anti-attack source-mac aging-time System view Default level 2: System level Parameters time: Specifies the age timer for protected MAC addresses, in the range of 60 to 6000 seconds. Description Use arp anti-attack source-mac aging-time to configure the age timer for protected MAC addresses. Use undo arp anti-attack source-mac aging-time to restore the default. By default, the age timer for protected MAC addresses is 300 seconds (five minutes). Examples # Configure the age timer for protected MAC addresses as 60 seconds. system-view [Sysname] arp anti-attack source-mac aging-time 60 arp anti-attack source-mac exclude-mac Syntax arp anti-attack source-mac exclude-mac mac-address& View undo arp anti-attack source-mac exclude-mac [ mac-address& ] System view Default level 2: System level 255