HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 94
stop-accounting-buffer enable (HWTACACS scheme view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Description Use secondary authorization to specify the secondary HWTACACS authorization server. Use undo secondary authorization to remove the configuration. By default, no secondary HWTACACS authorization server is specified. The IP addresses of the primary and secondary authorization servers cannot be the same. Otherwise, the configuration fails. If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance vpn-instance-name option. The VPN specified by this command takes precedence over the VPN specified for the HWTACACS scheme. If you configure the command repeatedly, only the last configuration takes effect. You can remove an authorization server only when it is not used by any active TCP connection to send authorization packets. Removing an authorization server affects only authorization processes that occur after the remove operation. Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view). Examples # Configure the secondary authorization server 10.163.155.13 with TCP port number 49. system-view [Sysname] hwtacacs scheme hwt1 [Sysname-hwtacacs-hwt1] secondary authorization 10.163.155.13 49 stop-accounting-buffer enable (HWTACACS scheme view) Syntax stop-accounting-buffer enable View undo stop-accounting-buffer enable HWTACACS scheme view Default level 2: System level Parameters None Description Use stop-accounting-buffer enable to enable the switch to buffer stop-accounting requests to which no responses are received. Use undo stop-accounting-buffer enable to disable the buffering function. By default, the switch buffers stop-accounting requests to which no responses are received. Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every stop-accounting request to the HWTACACS accounting servers. For each stop-accounting request getting no response in the specified period of time, the NAS buffers and resends the packet until it receives a response or the number of transmission attempts reaches the configured limit. In the latter case, the NAS discards the packet. 85