HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 148
port-security timer autolearn aging, port-security timer disableport
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
[Sysname-GigabitEthernet1/0/1] port-security port-mode secure # Change the port security mode of port GigabitEthernet 1/0/1 to userLogin. [Sysname-GigabitEthernet1/0/1] undo port-security port-mode [Sysname-GigabitEthernet1/0/1] port-security port-mode userlogin port-security timer autolearn aging Syntax port-security timer autolearn aging time-value View undo port-security timer autolearn aging System view Default level 2: System level Parameters time-value: Sets the aging timer in minutes for secure MAC addresses. The value is in the range of 0 to 129600. To disable the aging timer, set the timer to 0. Description Use port-security timer autolearn aging to set the secure MAC aging timer. The timer applies to all sticky or dynamic secure MAC addresses. Use undo port-security timer autolearn aging to restore the default. By default, secure MAC addresses never age out. Related commands: display port-security and port-security mac-address security. Examples # Set the secure MAC aging timer to 30 minutes. system-view [Sysname] port-security timer autolearn aging 30 port-security timer disableport Syntax port-security timer disableport time-value View undo port-security timer disableport System view Default level 2: System level Parameters time-value: Specifies the silence period during which the port remains disabled, in seconds. It is in the range of 20 to 300. 139