HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 46
attribute 25 car, data-flow-format (RADIUS scheme view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Use undo accounting-on enable to disable the accounting-on feature. By default, the accounting-on feature is disabled. Parameters set with the accounting-on enable command take effect immediately. After executing the accounting-on enable command, issue the save command to make sure that the command takes effect after the switch reboots. For information about the save command, see Fundamentals Command Reference. Related commands: radius scheme. Examples # Enable the accounting-on feature for RADIUS authentication scheme radius1, set the retransmission interval to 5 seconds, and set the transmission attempts to 15. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] accounting-on enable interval 5 send 15 attribute 25 car Syntax attribute 25 car View undo attribute 25 car RADIUS scheme view Default level 2: System level Parameters None Description Use attribute 25 car to specify to interpret the RADIUS class attribute (attribute 25) as CAR parameters. Use undo attribute 25 car to restore the default. By default, RADIUS attribute 25 is not interpreted as CAR parameters. Related commands: display radius scheme and display connection. Examples # Specify to interpret RADIUS attribute 25 as CAR parameters. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] attribute 25 car data-flow-format (RADIUS scheme view) Syntax data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet | kilo-packet | mega-packet | one-packet } } * 37