HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 180

[Sysname] public-key local export rsa openssh ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQDAo0dVYR1S5f30eLKGNKuqb5HU3M0TTSaGlER2GmcRI2sgSegbo1x6u t5NIc5+jJxuRCU4+gMc76iS8d+2d50FqIweEkHHkSG/ddgXt/iAZ6cY81bdu/CKxGiQlkUpbw4vSv+X5KeE7j +o0MpOpzh3W768/+u1riz+1LcwVTs51Q== rsa-key public-key peer Syntax public-key peer keyname View undo public-key peer keyname System view Default level 2: System level Parameters keyname: Specifies a name for the peer public key on the local device, a case-sensitive string of 1 to 64 characters. Description Use public-key peer to specify a name for the peer public key and enter public key view. Use undo public-key peer to remove the public key. To manually configure the peer public key on the local device, obtain the public key in hexadecimal from the peer device beforehand, and perform the following configurations on the local device: 1. Execute the public-key peer command, and then the public-key-code begin command to enter public key code view. 2. Type the peer public key. 3. Execute the public-key-code end command to save the public key and return to public key view. 4. Execute the peer-public-key end command to return to system view. Related commands: public-key-code begin, public-key-code end, peer-public-key end, and display public-key peer. Examples # Specify the name for the per public key as key1 and enter public key view. system-view [Sysname] public-key peer key1 [Sysname-pkey-public-key] public-key peer import sshkey Syntax public-key peer keyname import sshkey filename undo public-key peer keyname 171