HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 117
dot1x retry
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
View Ethernet interface view Default level 2: System level Parameters None Description Use dot1x re-authenticate to enable the periodic online user re-authentication function. Use undo dot1x re-authenticate to disable the function. By default, the periodic online user re-authentication function is disabled. Periodic re-authentication enables the access device to periodically authenticate online 802.1X users on a port. This function tracks the connection status of online users and updates the authorization attributes assigned by the server, such as the ACL, VLAN, and user profile-based QoS. You can use the dot1x timer reauth-period command to configure the interval for re-authentication. Related commands: dot1x timer reauth-period. Examples # Enable the 802.1X periodic online user re-authentication function on GigabitEthernet 1/0/1 and set the periodic re-authentication interval to 1800 seconds. system-view [Sysname] dot1x timer reauth-period 1800 [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] dot1x re-authenticate dot1x retry Syntax dot1x retry max-retry-value View undo dot1x retry System view Default level 2: System level Parameters max-retry-value: Specifies the maximum number of attempts for sending an authentication request to a client, in the range of 1 to 10. Description Use dot1x retry to set the maximum number of attempts for sending an authentication request to a client. Use undo dot1x retry to restore the default. By default, the maximum number of attempts that the device can send an authentication request to a client is twice. 108