HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 217

Table 28 Command output Field Server Name(IP) Server public key name Description Name or IP address of the server Name of the host public key of the server ssh client authentication server Syntax ssh client authentication server server assign publickey keyname View undo ssh client authentication server server assign publickey System view Default level 2: System level Parameters server: Specifies an IP address or name of the server, a string of 1 to 80 characters. assign publickey keyname: Specifies the name of the host public key of the server, a string of 1 to 64 characters. Description Use ssh client authentication server on a client to configure the host public key of a server so that the client can determine whether the server is trustworthy. Use undo ssh client authentication server to remove the configuration. By default, the host public key of the server is not configured, and when logging into the server, the client uses the IP address or host name used for login as the public key name. A client that does not support first-time authentication rejects unauthenticated servers. To enable the client to use the correct public key of a server to authenticate the server, you must configure the public keys of the servers and specify the mappings between public keys and servers on the client. The specified host public key of the server must already exist. Related commands: ssh client first-time enable. Examples # Configure the public key of the server with the IP address of 192.168.0.1 to be key1. system-view [Sysname] ssh client authentication server 192.168.0.1 assign publickey key1 ssh client dscp Syntax ssh client dscp dscp-value undo ssh client dscp 208