HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 261
arp source-suppression limit, display arp source-suppression
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Description Use arp source-suppression enable to enable the ARP source suppression function. Use undo arp source-suppression enable to disable the function. By default, the ARP source suppression function is disabled. Related commands: display arp source-suppression. Examples # Enable the ARP source suppression function. system-view [Sysname] arp source-suppression enable arp source-suppression limit Syntax arp source-suppression limit limit-value View undo arp source-suppression limit System view Default level 2: System level Parameters limit-value: Specifies the maximum number of packets with the same source IP address but unresolvable destination IP addresses that the device can receive in five seconds. It ranges from 2 to 1024. Description Use arp source-suppression limit to set the maximum number of packets with the same source IP address but unresolvable destination IP addresses that the device can receive in five seconds. Use undo arp source-suppression limit to restore the default value, which is 10. With this feature configured, whenever the number of packets with unresolvable destination IP addresses from a host within five seconds exceeds the specified threshold, the device suppresses the sending host from triggering any ARP requests within the following five seconds. Related commands: display arp source-suppression. Examples # Set the maximum number of packets with the same source address but unresolvable destination IP addresses that the device can receive in five seconds to 100. system-view [Sysname] arp source-suppression limit 100 display arp source-suppression Syntax display arp source-suppression [ | { begin | exclude | include } regular-expression ] 252