HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 55

authentication: Sets the shared key for secure RADIUS authentication/authorization communication. cipher: Sets a ciphertext shared key. simple: Sets a plaintext shared key. key: Specifies the shared key string. This argument is case sensitive. If simple is specified, it must be a string of 1 to 64 characters. If cipher is specified, it must be a ciphertext string of 1 to 117 characters. If neither cipher nor simple is specified, you set a plaintext shared key string. Description Use key to set the shared key for secure RADIUS authentication/authorization or accounting communication. Use undo key to restore the default. By default, no shared key is configured. For secrecy, all shared keys, including shared keys configured in plain text, are saved in cipher text. The shared keys specified during the configuration of the RADIUS servers, if any, take precedence. The shared keys configured on the switch must match those configured on the RADIUS servers. Related commands: display radius scheme. Examples # For RADIUS scheme radius1, set the shared key for secure authentication/authorization communication to $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B in cipher text. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] key authentication cipher $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B # For RADIUS scheme radius1, set the shared key for secure accounting communication to ok in plain text. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] key accounting simple ok # For RADIUS scheme radius1, set the shared key for secure accounting communication to ok in plain text. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] key accounting ok nas-ip (RADIUS scheme view) Syntax nas-ip { ipv4-address | ipv6 ipv6-address } undo nas-ip View RADIUS scheme view Default level 2: System level 46