HP 6125G HP 6125G & 6125G/XG Blade Switches Security Command Reference - Page 71

Examples # For RADIUS scheme radius1, set the IP address of the secondary authentication/authorization server to 10.110.1.2, the UDP port to 1812, and the shared key to $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B in cipher text. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] secondary authentication 10.110.1.2 1812 key cipher $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B # Specify two secondary authentication/authorization servers for RADIUS scheme radius2, with the server IP addresses of 10.110.1.1 and 10.110.1.2, and the UDP port number of 1813. Set the shared keys to hello in plain text. system-view [Sysname] radius scheme radius2 [Sysname-radius-radius2] secondary authentication 10.110.1.1 1812 key simple hello [Sysname-radius-radius2] secondary authentication 10.110.1.2 1812 key simple hello # In RADIUS scheme radius1, set the username used for status detection of the secondary authentication/authorization server to test in plain text, and set the server status detection interval to 120 minutes. system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] secondary authentication 10.110.1.1 probe username test interval 120 security-policy-server Syntax security-policy-server ip-address View undo security-policy-server { ip-address | all } RADIUS scheme view Default level 2: System level Parameters ip-address: Specifies a security policy server by its IP address. all: Specifies all security policy servers. Description Use security-policy-server to specify a security policy server for a RADIUS scheme. Use undo security-policy-server to remove security policy servers for a RADIUS scheme. By default, no security policy server is specified for a RADIUS scheme. You can change security policy servers for a RADIUS scheme only when no user is using the scheme. Examples # Specify security policy server 10.110.1.2 for RADIUS scheme radius1. system-view 62