HP LaserJet Enterprise 600 HP LaserJet Enterprise 600 M601, M602, and M603 Ser - Page 185
Solve problems checklist, The control panel should indicate ready status. If an error message appears
View all HP LaserJet Enterprise 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Solve problems checklist Follow these steps when trying to solve a problem with the product. 1. Make sure the product Ready light is on. If no lights are on, complete these steps: a. Check the power-cable connections. b. Check that the power is turned on. c. Make sure that the line voltage is correct for the product power configuration. (See the label that is on the back of the product for voltage requirements.) If you are using a power strip and its voltage is not within specifications, plug the product directly into the wall. If it is already plugged into the wall, try a different outlet. d. If none of these measures restores power, contact HP Customer Care. 2. Check the cabling. a. Check the cable connection between the product and the computer or network port. Make sure that the connection is secure. b. Make sure that the cable itself is not faulty by using a different cable, if possible. c. Check the network connection. 3. The control panel should indicate ready status. If an error message appears, resolve the error. 4. Ensure that the paper that you are using meets specifications. 5. Print a configuration page. If the product is connected to a network, an HP Jetdirect page also prints. a. At the product control panel, press the Home button. b. Open the following menus: ◦ Administration ◦ Reports ◦ Configuration/Status Pages ◦ Configuration Page c. Press the OK button. If the pages do not print, check that at least one tray contains paper. If the page jams in the product, follow the instructions on the control panel to clear the jam. ENWW Solve problems checklist 169