HP LaserJet Enterprise 600 HP LaserJet Enterprise 600 M601, M602, and M603 Ser - Page 84
Link speed and duplex settings, Administration, Network Settings, Jetdirect Menu, Link Speed
View all HP LaserJet Enterprise 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Link speed and duplex settings The link speed and communication mode of the print server must match the network. For most situations, leave the product in Auto mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel. NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle. 1. At the control panel, press the Home button. 2. Open each of the following menus: a. Administration b. Network Settings c. Jetdirect Menu d. Link Speed 3. Select one of the following options. Setting Auto 10T Half 10T Full 100TX Half 100TX Full 100TX Auto 1000T Full Description The print server automatically configures itself for the highest link speed and communication mode allowed on the network. 10 megabytes per second (Mbps), half-duplex operation 10 Mbps, full-duplex operation 100 Mbps, half-duplex operation 100 Mbps, full-duplex operation Limits auto-negotiation to a maximum link speed of 100 Mbps 1000 Mbps, full-duplex operation 4. Press the OK button. The product turns off and then on. 68 Chapter 5 Connect the product with Windows ENWW