Konica Minolta bizhub PRESS C6000 IC-601 Job Centro User Guide - Page 15
Setup procedure, d
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.4 Setup procedure 2 2.4 Setup procedure To use Job Centro, you must complete the setup in advance. The setup refers to a series of procedures for connecting the image controller and the computer to the network and installing Job Centro to the computer. Perform the setup using the following procedures. 1 Connect the image controller and the computer to the network. 2 Check that the computer to be used is connected to the network. 3 Confirm the IP address and the port number of the JSP settings of the image controller. 4 Install Job Centro. d Reference For details on the connectable interfaces, refer to page 2-6 For details of the image controller, refer to "User's Guide - POD Administrator's Reference". IC-601 2-7
IC-601
2-7
2.4
Setup procedure
2
2.4
Setup procedure
To use Job Centro, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the image controller and the computer to the net-
work and installing Job Centro to the computer.
Perform the setup using the following procedures.
1
Connect the image controller and the computer to the network.
2
Check that the computer to be used is connected to the network.
3
Confirm the IP address and the port number of the JSP settings of the image controller.
4
Install Job Centro.
d
Reference
For details on the connectable interfaces, refer to page 2-6
For details of the image controller, refer to "User's Guide - POD Administrator's Reference".