Konica Minolta bizhub PRESS C6000 IC-601 Job Centro User Guide - Page 18
Settings of the image controller, TCP/IP Setting, JSP Setting
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3.2 Installer 3 3.2.2 Settings of the image controller The network setting of the image controller is necessary beforehand. TCP/IP Setting Specify the IP address in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [TCP/IP Setting] of this machine. JSP Setting Specify the port number in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [JSP Setting] of this machine. - The default value is "30081". Usually, the amendment is unnecessary. - When [JSP Setting] is [Enable] and [Authentication Setting] is [Disable], you can use Job Centro. d Reference For details of the settings for the image controller, refer to "User's Guide - POD Administrator's Reference". IC-601 3-3
IC-601
3-3
3.2
Installer
3
3.2.2
Settings of the image controller
The network setting of the image controller is necessary beforehand.
TCP/IP Setting
Specify the IP address in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [TCP/IP Set-
ting] of this machine.
JSP Setting
Specify the port number in [Administrator Setting] - [Controller Setting] - [Controller NIC Setting] - [JSP Set-
ting] of this machine.
-
The default value is "30081". Usually, the amendment is unnecessary.
-
When [JSP Setting] is [Enable] and [Authentication Setting] is [Disable], you can use Job Centro.
d
Reference
For details of the settings for the image controller, refer to "User's Guide - POD Administrator's Reference".