Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 103

Using Your Printer Setup Menu Setup Menu Selections Menu Item Printer Language Values and Functions of the Menu Items PCL Emulation* PS 2 Emulation The printer language defines how the computer communicates with the printer. Your computer uses printer languages to send print data to the printer, such as PCL emulation and PostScript Level 2 emulation. You can select one as the default printer language. However, setting one as the default does not restrict the software application from sending print jobs that use the other printer language. Power Saver Disabled 1 to 120 (20*) The Power Saver menu item lets you reduce power usage when the printer is idle. The Power Saver setting determines the length of time the printer waits after a job is printed before it goes to a reduced power state. Press Go to take the printer out of Power Saver. If your printer is used constantly, select Disabled which keeps the printer ready to print with the minimum warm-up time. This uses more energy to keep the printer warm and ready to print. If your printer is in an environment where it shares an electrical circuit with room lighting and you notice lights flickering, you may set Power Saver to 1, so the printer goes to Power Saver mode one minute after the end of the print job. This uses much less energy, but requires more warm-up time for the printer. If you want a balance between energy consumption and keeping the printer ready to print quickly, select a Power Saver time between 1 to 120 minutes. * Factory Default Using the Operator Panel and Menus 87 Using the Operator Panel and Menus